Turn uint32 array in bc array
diff --git a/datokenizer.go b/datokenizer.go
index 4e870d9..d5a2303 100644
--- a/datokenizer.go
+++ b/datokenizer.go
@@ -20,8 +20,6 @@
// looked up in a map or similar.
// - replace maxSize with the check value
// - Add checksum to serialization.
-// - Introduce methods on BC array entries instead of
-// jumping into the entries all the time!
// - Instead of memoizing the loadFactor, better remember
// the number of set transitions
// - Replace/Enhance table with a map
@@ -88,6 +86,11 @@
tokenend int
}
+type bc struct {
+ base uint32
+ check uint32
+}
+
// DaTokenizer represents a tokenizer implemented as a
// Double Array FSA.
type DaTokenizer struct {
@@ -95,7 +98,7 @@
// sigmaList []rune
maxSize int
loadFactor float64
- array []uint32
+ array []bc
// lastFilledBase uint32
// Special symbols in sigma
@@ -504,6 +507,8 @@
// lastFilledBase: 1,
}
+ dat.resize(dat.final)
+
// dat.sigmaList = make([]rune, tok.sigmaCount)
for num, sym := range tok.sigmaRev {
@@ -536,7 +541,7 @@
tok.getSet(s, &A)
// Set base to the first free slot in the double array
- dat.setBase(t, dat.xCheck(A))
+ dat.array[t].setBase(dat.xCheck(A))
// TODO:
// Sort the outgoing transitions based on the
@@ -551,8 +556,13 @@
s1 := tok.transitions[s][a].end
// Store the transition
- t1 := dat.getBase(t) + uint32(a)
- dat.setCheck(t1, t)
+ t1 := dat.array[t].getBase() + uint32(a)
+ dat.array[t1].setCheck(t)
+
+ // Set maxSize
+ if dat.maxSize < int(t1) {
+ dat.maxSize = int(t1)
+ }
if DEBUG {
fmt.Println("Translate transition",
@@ -561,7 +571,7 @@
// Mark the state as being the target of a nontoken transition
if tok.transitions[s][a].nontoken {
- dat.setNonToken(t1, true)
+ dat.array[t1].setNonToken(true)
if DEBUG {
fmt.Println("Set", t1, "to nontoken")
}
@@ -569,7 +579,7 @@
// Mark the state as being the target of a tokenend transition
if tok.transitions[s][a].tokenend {
- dat.setTokenEnd(t1, true)
+ dat.array[t1].setTokenEnd(true)
if DEBUG {
fmt.Println("Set", t1, "to tokenend")
}
@@ -585,18 +595,23 @@
size++
} else {
// Overwrite with the representative state
- dat.setBase(t1, r)
- dat.setSeparate(t1, true)
+ dat.array[t1].setBase(r)
+ dat.array[t1].setSeparate(true)
}
} else {
// Store a final transition
- dat.setCheck(dat.getBase(t)+uint32(dat.final), t)
+ dat.array[dat.array[t].getBase()+uint32(dat.final)].setCheck(t)
+
+ if dat.maxSize < int(dat.array[t].getBase()+uint32(dat.final)) {
+ dat.maxSize = int(dat.array[t].getBase() + uint32(dat.final))
+ }
}
}
}
// Following Mizobuchi et al (2000) the size of the
// FSA should be stored in check(1).
+ // We make the size a bit smaller so we never have to check for boundaries.
dat.setSize(dat.maxSize + 1)
dat.array = dat.array[:dat.maxSize+1]
return dat
@@ -620,96 +635,80 @@
// TODO:
// This is a bit too aggressive atm and should be calmed down.
if len(dat.array) <= l {
- dat.array = append(dat.array, make([]uint32, l)...)
+ dat.array = append(dat.array, make([]bc, l)...)
}
}
// Set base value in double array
-func (dat *DaTokenizer) setBase(p uint32, v uint32) {
- l := int(p*2 + 1)
- if dat.maxSize < l {
- dat.resize(l)
- dat.maxSize = l
- }
- dat.array[l-1] = v
+func (bc *bc) setBase(v uint32) {
+ bc.base = v
}
// Get base value in double array
-func (dat *DaTokenizer) getBase(p uint32) uint32 {
- if int(p*2) > dat.maxSize {
- return 0
- }
- return dat.array[p*2] & RESTBIT
+func (bc *bc) getBase() uint32 {
+ return bc.base & RESTBIT
}
// Set check value in double array
-func (dat *DaTokenizer) setCheck(p uint32, v uint32) {
- l := int(p*2 + 1)
- if dat.maxSize < l {
- dat.resize(l)
- dat.maxSize = l
- }
- dat.array[l] = v
+func (bc *bc) setCheck(v uint32) {
+ bc.check = v
}
// Get check value in double array
-func (dat *DaTokenizer) getCheck(p uint32) uint32 {
- if int((p*2)+1) > dat.maxSize {
- return 0
- }
- return dat.array[(p*2)+1] & RESTBIT
+func (bc *bc) getCheck() uint32 {
+ return bc.check & RESTBIT
}
// Returns true if a state is separate pointing to a representative
-func (dat *DaTokenizer) isSeparate(p uint32) bool {
- return dat.array[p*2]&FIRSTBIT != 0
+func (bc *bc) isSeparate() bool {
+ return bc.base&FIRSTBIT != 0
}
// Mark a state as separate pointing to a representative
-func (dat *DaTokenizer) setSeparate(p uint32, sep bool) {
+func (bc *bc) setSeparate(sep bool) {
if sep {
- dat.array[p*2] |= FIRSTBIT
+ bc.base |= FIRSTBIT
} else {
- dat.array[p*2] &= (RESTBIT | SECONDBIT)
+ bc.base &= (RESTBIT | SECONDBIT)
}
}
// Returns true if a state is the target of a nontoken transition
-func (dat *DaTokenizer) isNonToken(p uint32) bool {
- return dat.array[p*2+1]&FIRSTBIT != 0
+func (bc *bc) isNonToken() bool {
+ return bc.check&FIRSTBIT != 0
}
// Mark a state as being the target of a nontoken transition
-func (dat *DaTokenizer) setNonToken(p uint32, sep bool) {
+func (bc *bc) setNonToken(sep bool) {
if sep {
- dat.array[p*2+1] |= FIRSTBIT
+ bc.check |= FIRSTBIT
} else {
- dat.array[p*2+1] &= (RESTBIT | SECONDBIT)
+ bc.check &= (RESTBIT | SECONDBIT)
}
}
// Returns true if a state is the target of a tokenend transition
-func (dat *DaTokenizer) isTokenEnd(p uint32) bool {
- return dat.array[p*2+1]&SECONDBIT != 0
+func (bc *bc) isTokenEnd() bool {
+ return bc.check&SECONDBIT != 0
}
// Mark a state as being the target of a tokenend transition
-func (dat *DaTokenizer) setTokenEnd(p uint32, sep bool) {
+func (bc *bc) setTokenEnd(sep bool) {
if sep {
- dat.array[p*2+1] |= SECONDBIT
+ bc.check |= SECONDBIT
} else {
- dat.array[p*2+1] &= (RESTBIT | FIRSTBIT)
+ bc.check &= (RESTBIT | FIRSTBIT)
}
}
// Set size of double array
func (dat *DaTokenizer) setSize(v int) {
- dat.setCheck(1, uint32(v))
+ dat.array[1].setCheck(uint32(v))
}
// Get size of double array
func (dat *DaTokenizer) GetSize() int {
- return int(dat.getCheck(1))
+ return int(dat.array[1].getCheck())
}
// Based on Mizobuchi et al (2000), p. 124
@@ -735,9 +734,9 @@
*/
// Resize the array if necessary
- dat.resize((int(base) + dat.final) * 2)
+ dat.resize(int(base) + dat.final)
for _, a := range symbols {
- if dat.getCheck(base+uint32(a)) != 0 {
+ if dat.array[int(base)+a].getCheck() != 0 {
base++
goto OVERLAP
}
@@ -752,15 +751,15 @@
valid := make([]int, 0, len(dat.sigma))
for _, a := range dat.sigma {
- t1 := dat.getBase(t) + uint32(a)
- if t1 <= dat.getCheck(1) && dat.getCheck(t1) == t {
+ t1 := dat.array[t].getBase() + uint32(a)
+ if t1 <= dat.array[1].getCheck() && dat.array[t1].getCheck() == t {
valid = append(valid, a)
}
}
for _, a := range []int{dat.epsilon, dat.unknown, dat.identity, dat.final} {
- t1 := dat.getBase(t) + uint32(a)
- if t1 <= dat.getCheck(1) && dat.getCheck(t1) == t {
+ t1 := dat.array[t].getBase() + uint32(a)
+ if t1 <= dat.array[1].getCheck() && dat.array[t1].getCheck() == t {
valid = append(valid, -1*a)
}
}
@@ -780,8 +779,8 @@
}
nonEmpty := 0
all := len(dat.array) / 2
- for x := 1; x <= len(dat.array); x = x + 2 {
- if dat.array[x] != 0 {
+ for x := 1; x < len(dat.array); x++ {
+ if dat.array[x].getBase() != 0 {
nonEmpty++
}
}
@@ -840,7 +839,7 @@
bo.PutUint16(buf[6:8], uint16(dat.identity))
bo.PutUint16(buf[8:10], uint16(dat.final))
bo.PutUint16(buf[10:12], uint16(len(sigmalist)))
- bo.PutUint32(buf[12:16], uint32(len(dat.array)))
+ bo.PutUint32(buf[12:16], uint32(len(dat.array)*2)) // Legacy support
more, err := wb.Write(buf[0:16])
if err != nil {
log.Println(err)
@@ -873,17 +872,28 @@
}
all += more
- for x := 0; x < len(dat.array); x++ {
- // for _, d := range dat.array {
- bo.PutUint32(buf[0:4], dat.array[x])
- more, err := wb.Write(buf[0:4])
+ // for x := 0; x < len(dat.array); x++ {
+ for _, bc := range dat.array {
+ bo.PutUint32(buf[0:4], bc.base)
+ more, err = wb.Write(buf[0:4])
if err != nil {
log.Println(err)
return int64(all), err
}
all += more
if more != 4 {
- log.Println("Can not write uint32")
+ log.Println("Can not write base uint32")
+ return int64(all), err
+ }
+ bo.PutUint32(buf[0:4], bc.check)
+ more, err = wb.Write(buf[0:4])
+ if err != nil {
+ log.Println(err)
+ return int64(all), err
+ }
+ all += more
+ if more != 4 {
+ log.Println("Can not write check uint32")
return int64(all), err
}
}
@@ -967,7 +977,7 @@
dat.final = int(bo.Uint16(buf[8:10]))
sigmaCount := int(bo.Uint16(buf[10:12]))
- arraySize := int(bo.Uint32(buf[12:16]))
+ arraySize := int(bo.Uint32(buf[12:16])) / 2 // Legacy support
// Shouldn't be relevant though
dat.maxSize = arraySize - 1
@@ -999,7 +1009,7 @@
}
// Read based on length
- dat.array = make([]uint32, arraySize)
+ dat.array = make([]bc, arraySize)
dataArray, err := io.ReadAll(r)
@@ -1008,13 +1018,14 @@
return nil
}
- if len(dataArray) < arraySize*4 {
+ if len(dataArray) < arraySize*8 {
log.Println("Not enough bytes read")
return nil
}
for x := 0; x < arraySize; x++ {
- dat.array[x] = bo.Uint32(dataArray[x*4 : (x*4)+4])
+ dat.array[x].base = bo.Uint32(dataArray[x*8 : (x*8)+4])
+ dat.array[x].check = bo.Uint32(dataArray[(x*8)+4 : (x*8)+8])
}
return dat
@@ -1133,7 +1144,7 @@
t0 = t
// Check for epsilon transitions and remember
- if dat.getCheck(dat.getBase(t0)+uint32(dat.epsilon)) == t0 {
+ if dat.array[dat.array[t0].getBase()+uint32(dat.epsilon)].getCheck() == t0 {
// Remember state for backtracking to last tokenend state
epsilonState = t0
epsilonOffset = buffo
@@ -1141,7 +1152,8 @@
}
// Checks a transition based on t0, a and buffo
- t = dat.getBase(t0) + uint32(a)
+ t = dat.array[t0].getBase() + uint32(a)
+ ta := dat.array[t]
if DEBUG {
// Char is only relevant if set
@@ -1152,10 +1164,10 @@
}
// Check if the transition is invalid according to the double array
- if t > dat.getCheck(1) || dat.getCheck(t) != t0 {
+ if t > dat.array[1].getCheck() || ta.getCheck() != t0 {
if DEBUG {
- fmt.Println("Match is not fine!", t, "and", dat.getCheck(t), "vs", t0)
+ fmt.Println("Match is not fine!", t, "and", ta.getCheck(), "vs", t0)
}
if !ok && a == dat.identity {
@@ -1196,7 +1208,7 @@
buffo++
// Transition does not produce a character
- if buffo == 1 && dat.isNonToken(t) {
+ if buffo == 1 && ta.isNonToken() {
if DEBUG {
fmt.Println("Nontoken forward", showBuffer(buffer, buffo, buffi))
}
@@ -1205,7 +1217,7 @@
}
// Transition marks the end of a token - so flush the buffer
- if dat.isTokenEnd(t) {
+ if ta.isTokenEnd() {
if buffi > 0 {
if DEBUG {
@@ -1237,8 +1249,9 @@
}
// Move to representative state
- if dat.isSeparate(t) {
- t = dat.getBase(t)
+ if ta.isSeparate() {
+ t = ta.getBase()
+ ta = dat.array[t]
if DEBUG {
fmt.Println("Representative pointing to", t)
@@ -1264,7 +1277,9 @@
}
// Automaton is in a final state, so flush the buffer and return
- if dat.getCheck(dat.getBase(t)+uint32(dat.final)) == t {
+ x := dat.array[t].getBase() + uint32(dat.final)
+
+ if x < dat.array[1].getCheck() && dat.array[x].getCheck() == t {
if buffi > 0 {
if DEBUG {
@@ -1272,7 +1287,7 @@
}
writer.WriteString(string(buffer[:buffi]))
- if dat.isTokenEnd(t) {
+ if dat.array[t].isTokenEnd() {
writer.WriteRune('\n')
if DEBUG {
fmt.Println("-> Newline")
@@ -1283,7 +1298,7 @@
// Add an additional sentence ending, if the file is over but no explicit
// sentence split was reached. This may be controversial and therefore
// optional via parameter.
- if !dat.isTokenEnd(t0) {
+ if !dat.array[t0].isTokenEnd() {
writer.WriteRune('\n')
if DEBUG {
fmt.Println("-> Newline")
@@ -1298,10 +1313,10 @@
// Check epsilon transitions until a final state is reached
t0 = t
- t = dat.getBase(t0) + uint32(dat.epsilon)
+ t = dat.array[t0].getBase() + uint32(dat.epsilon)
a = dat.epsilon
newchar = false
- if dat.getCheck(t) == t0 {
+ if dat.array[t].getCheck() == t0 {
// Remember state for backtracking to last tokenend state
goto PARSECHAR